Entries under Category Spa Operation

Page 5 of 512345

Can I lock all the keys on the panel?

Share There are 2 keypad lock modes: the full lock, or the partial lock. The full lock, as the name implies, locks ALL keypad functions. The partial lock locks only the programming functions; the Pump, Blower, and Light keys remain useable. To lock, press on the Pump 1 key for 5 seconds. At that point, [...]

Can I change the duration of the filtration cycle?

Share The system will automatically perform four filtration cycles per day, 6 hours apart. During a cycle, the following sequence is executed: Pump 2 and blower start at high speed for 1 minute Pump 1 then starts and runs at low speed for the preset number of hours; Ozone output is turned on (optional) To [...]

Page 5 of 512345