The system will automatically perform four filtration cycles per day, 6 hours apart.
During a cycle, the following sequence is executed:
- Pump 2 and blower start at high speed for 1 minute
- Pump 1 then starts and runs at low speed for the preset number of hours;
- Ozone output is turned on (optional)
To set the duration of the filtration cycles (the amount of time Pump 1 will be on), follow tis procedure:
Press of the Filter Cycle key. The display will show Fd XX where XX represents the number of hours Pump 1 will be operating at low speed. Use the Up and Down arrow keys to change the number of hours.
- 00=no filtration
- 01=1 hour/cycle
- 02=2 hour/cycle
Press the filter cycle key again to display the number of cycles (FF) in a 24 hour period. You can select from 1 cycle to 4 cycles per day. The Filter Cycle triangular icon will appear on the display when a filter cycle is on.
