Engineered For The World's Harshest Climates
Share Occasional foaming may be caused by detergents brought in on swimsuits body products such as skin creams, hair conditioners, and so on heavy bather loads However, persistent foaming may be a sign of low sanitizer levels, so it is important that you check your water balance whenever foaming occurs. If you are using regular pleated [...]
Share We do not recommend hydrogen peroxide for use in our spas for a number of reasons. We have have not researched its use in our product, so we do not know what its effect would be on the plastics and other materials we use. Commercial-grade peroxide strong enough to be effective in hot tubs [...]
Share Not really. On April 11, 2007, Blue Falls Manufacturing advised that BaquaSpa and similar biguanide products were no longer recommended for our hot tubs. In a corporate memo, all dealers were advised to cease recommending and selling these products for use with Arctic and Coyote products. This decision was made based on two factors [...]
Share The Genesis Device, manufactured by Pioneer H20 Technologies of Colorado, uses electrolysis of salts to create a bank of bromine. The product is not factory installed, so service, warranty, and support must come from your local dealer who installed the product or the original manufacturer. If you are interested in salt water purification systems [...]
Share The recommended Total Alkalinity (TA) for your spa water is 125-150ppm. Total Alkalinity is a measure of the total levels or carbonates, bicarbonates, hydroxides, and other alkaline substances in the water. TA is referred to as the water’s “pH buffer”. In other words, it’s a measure of the ability of the water to resist [...]
